Absolute Scanner AS1 Kit
High-speed 3D laser scanner for arm and tracker, manual and automated
Leica T-Scan 5
3D laser line scanner for AT960 systems.
The Leica Absolute Tracker takes your scanning experience to a new level of excellence in volumes up to 60m (Ø) in a single set-up. Leica T-Scan 5 is more than 15x faster compared to the previous model and has almost double the stand-off distance, which results in more efficient data capture especially in difficult to reach areas.
Leica Absolute Scanner LAS
3D laser line scanner for AT960 systems.
Collecting accurate point-cloud data in measurement volumes of up to 60 metres, LAS combines the six degrees of freedom (6DoF) measurement capabilities of the Leica Absolute Tracker AT960 coordinate measuring machine (CMM) with a lightweight and ergonomically-designed handheld laser scanner unit to provide a complete and user-friendly portable 3D scanning solution.
Leica Absolute Scanner LAS-XL
3D laser tracker system based on Absolute Distance Meter.
Reflector measurement range up to 160 m, with probing measurement range up to 10 m.
The new Leica Absolute Scanner LAS-XL is a handheld laser scanner designed to meet the needs of emerging 3D scanning applications for which higher productivity is the priority. Working in conjunction with the Leica Absolute Tracker AT960 range of high-end laser trackers, the LAS-XL opens the door to previously infeasible large-scale 3D digitization tasks.
T-scan
Highest point density Detecting smaller details and getting your scanning results much faster are the main advantages of Leica T-Scan’s new high point density feature. The higher lines and scan rates allow ideal feature recognition and a much quicker scanning at approved quality levels. With up to 160 lines per second or up to 210,000 points per second (210 kHz sampling rate), Leica T-Scan 5 is more than 15x faster compared to the previous model.
Ultra High Dynamic Range The T-Scan 5 can automatically detect very fine differences on any surface type or colour. This allows the operator to pay attention to the part being scanned, not the scanner settings required to scan the different surface types.
Enhanced usability The almost doubled stand-off distance and wider scan line allows more efficient data capture especially in difficult to reach areas with less effort. Hidden features and deep recesses are easier to cover than ever before. Leica T-Scan 5 new user feedback with improved dual-colour pilot beam and acoustic feedback offers most reliable data acquisition and superb user-experience.
Optimized for automation With the fastest data capture rate ever, new cable design and improved robustness, the new Leica T-Scan 5 provides time demanding production processes the ultimate benefit. It has been designed from the ground up to take full advantage of our most dynamic laser tracker performance and advancing robotic speeds in fully automated installations.
Simplicity at its best With no need of object preparation, the Leica T-Scan 5 system has never been as simple to install or use. The small lightweight controller needs neither configuration nor complicated cabling to connect.
LAS
Battery power option
The Leica Absolute Scanner LAS can be used on battery power and requires just a single network cable, offering complete portability for laser scanner measurements on the move.
Automatic adjustments for surface type
The ‘flying-dot’ operating concept enables the LAS scanner to automatically adjust laser intensity to the surface type, ensuring the best possible reading with no additional user workload.
Self-identifying sensor
The LAS laser scanner is automatically recognised by the Leica Absolute Tracker AT960, allowing you to make quick changes between 3D scanning, probing and reflector measurements.
On-scanner measurement profile change
Customisable pre-set scanning modes can be selected from the LAS’s main switch, giving you access to the right measurement profile at the right time without making adjustments in the software.
Multisensory feedback
The LAS laser scanner combines haptic, acoustic and visual feedback to guide you to the optimum measurement position with the minimum of training.
Robust IP50-rated design
Designed for robustness and durability in tough workshop conditions, LAS’s IP50 ingress protection rating gives you the ability to apply laser scanning measurement wherever you need it.
RDS software interface
Based on the same proven RDS software interface as Hexagon portable measuring arms, LAS enables you to draw on existing expertise for system checks, compensation and certifications.
LAS-XL
Super-Wide Scan Line
Never-before-seen measurement scan-line width of up to 600 millimetres makes the full digitisation of large surfaces faster and easier than ever before.
Extra-Large Stand-Off
Unprecedented measurement stand-off of up to 1000 millimetres delivers excellent access to hard to reach hidden measurement areas, opening up a new world of laser scanner applications that were previously out of reach.
Metrological Accuracy
With accuracy retained to within 300 microns, the LAS-XL is the perfect tool for digitising the larger, less complex surfaces that would typically demand infeasible measurement process times for a laser scanner.
Multi-Surface Capability
Multiple materials and finishes scannable within a single pass with no settings changes using Hexagon’s well-established flying-dot scanning technology that automatically adjusts laser intensity.
Battery Powered Portability
With the optional battery power configuration, the LAS-XL requires just a single network cable, offering complete portability for laser scanner measurements on the move.
Self-Identifying Sensor
The LAS-XL laser scanner is automatically recognised by the Leica Absolute Tracker AT960, allowing quick changes between 3D scanning, probing and reflector measurement.
On-Scanner Profile Selection
Customisable pre-set scanning modes selectable from the body of the scanner, giving access to the right measurement profile at the right time without software adjustments.
Multisensory feedback
Haptic, acoustic and visual feedback to guide you to the optimum measurement position with the minimum of training.
Robust IP50-rated design
Designed for durability in tough shop floor and workshop conditions, the IP50 ingress protection rating of the LAS-XL means laser scanning is ready to go wherever it’s needed.
RDS software interface
Based on the proven RDS software interface that is the foundation of the Hexagon range of portable measuring arms, for full expert confidence when it comes to system checks, compensation and certifications.
